Care and Maintenance of your Stained Glass Art

Greetings from Gainesville!
Below is a copy of some care and cleaning instructions I include with anybody's purchase of glass from Thistle Dew Art Studios. In most cases, even if you didn't get your stained glass piece from us, these tips should help with your glass. Enjoy!
-----------------------------------------------------
Thistle Dew Art Studios
Gainesville, Florida
Care and Maintenance of your Stained Glass Art
In a general sense, your new stained glass art is relatively maintenance free. Depending on environment, location, humidity, etc., in its natural state, some of the solder seams may show some white powdery spots on the solder seams. This is a simple form of oxidization. Sometimes your piece may simply get dusty or dirty and may just need some TLC.
Please follow these simple guidelines when some tender care is needed:
- Whenever handling your piece is necessary, always take care around any foiled edges as they may get bent back from the glass. Should this occur, gently push it back in place and rub it down with your finger wrapped in a paper towel. Should any white powdery oxidization occur along the solder seams, gently scrub with a toothbrush moistened with white vinegar.
- Your glass piece can be washed but you should avoid window specific spray cleaners as they usually contain ammonia and these products can strip away any wax finishes that have been applied and may impact any patina finishes.
- To wash, simply use lukewarm water and a mild soap. Use caution around any foiled edges. Rinse thoroughly with cool water and dry carefully. Using a hair dryer on a warm (not hot) setting can help for delicate areas.
- Waxing your piece is always recommended and would usually only need to be polished once or twice a year, depending on its location. Always use a carnuba based wax as this helps to seal any metals used in the construction of your piece. Turtle Wax with carnuba, in spray form, for automobiles is a good choice. As an alternative, white vinegar also is also a great polishing agent.
- When waxing, apply a moderate spray coat, distribute evenly, let wax dry to a hazy finish, and buff to a glossy shine with a terrycloth type material. Always take care around any narrow foiled edges, particularly when buffing.
- If any of the glass in your piece becomes cracked or broken, please reach out to me directly for repair.
- Enjoy!
Dave Morris
Thistle Dew Art Studios



